KillZone 2 on Ps Vita


Duration = 09:43

Related Videos

Description

Killzone 2 to playable on ps vita thr remote play it works on the vita on cfw 3.55 i will show more soon How to put Custom firmware on ur PS3 Download Official 3.55 Firmware here (LINK FIXED!): http://hotfile.com/dl/103896994/ac4369d/3.55_OFW.rar Download Custom kmeaw 3.55 Firmware here: http://www.mediafire.com/?u618j1rb6i8b9bo I AM NOT RESPONSIBLE FOR ANY BRICKING THAT MAY OCCUR FROM THIS HACK. If you follow the guide correctly, then you have no worries. ;) Please note, if you are running firmware 3.56 or higher, you cannot install CFW at present untill someone hacks 3.56. However, if you have 3.55 or lower, it's fun time ;) If you already have OFW 3.55 on your PS3, skip to Step 2. Step 1 - Downloading and installing OFW 3.55 1: Download OFW 3.55 (link above) 2: Insert a USB Stick into your PC and create a new folder called "PS3" 3: In that new folder, create another folder called "UPDATE" 4: Unzip the official 3.55 firmware and place the file "PS3UPDAT.PUP" into the Update folder. Once copied, eject your USB. 5: Now make sure your PS3 is turned off. 6: Power on the PS3 but DONT take your finger off the power button. The PS3 should beep about 2 times then shut off. 7: Now power the PS3 back on without letting your finger off the power button. Again, the PS3 should beep once, then twice. When the system beeps twice, let go of the power button. The recovery menu should appear. 8: Connect your controller with the USB cable and press the PS button. 9: Scroll down to "System Update" and press X. 10: Now insert your USB Stick into an available USB port on the PS3 and press START and SELECT at the same time. 11: Follow the on-screen instructions to finish installing official firmware 3.55. Step 2 - Downloading and Installing kmeaw 3.55 CFW: 1: Download Kmeaw CFW 3.55 (link above) 2: Insert a USB Stick into your PC and create a new folder called "PS3" 3: In that new folder, create another folder called "UPDATE" 4: Unzip the Kmeaw CFW 3.55 firmware using WinRar and place the file "PS3UPDAT.PUP" into the Update folder (If asked to replace the existing file, say yes). Once copied, eject your USB. 5: Now make sure your PS3 is turned off. 6: Power on the PS3 but DONT take your finger off the power button. The PS3 should beep about 2 times then shut off. 7: Now power the PS3 back on without letting your finger off the power button. Again, the PS3 should beep once, then twice. When the system beeps twice, let go of the power button. The recovery menu should appear. 8: Connect your controller with the USB cable and press the PS button. 9: Scroll down to "System Update" and press X. 10: Now insert your USB Stick into an available USB port on your PS3 and press START and SELECT at the same time. 11: Follow the on-screen instructions to finish installing Kmeaw CFW 3.55. Congratulations, you've just installed Kmeaw CFW 3.55! You can now run Homebrew apps and Games! Download homebrew from: http://ps3.dashhacks.com/downloads
For copyright or any other issue, please consult YouTube as per their Service Terms in C section of 6.